This material has a block out liner to give a completely opaque substrate, ideal for double sided banners so that there is absolutely no show-through from either image.

As with all our banners, there is a range of finishing that can be added to your banner at no extra charge, these are:

Hem and eyelet - This is the most common way of finishing banners, we fold the edges of the banner over and stitch them in place, and then punch eyelets along each each edge 1m apart.

Pole pockets - This is used to slide onto poles, we fold over opposite edges and stitch in place at whatever diameter you require to fit on your pole, the other edges are then just trimmed to size.

Trim to size - This is just what it says, we trim all the edges to the correct size as you specify for your banner.

As there could be hundreds of different ways of finishing a banner, we haven't put them all down here as options, but if you do require something more specific just let us know when placing your order and we will be able to help.

Price Per Square Meter:

0-10sqm = £25/sqm

11-20sqm = £24/sqm

21-30sqm = £23/sqm

31-50sqm = £22/sqm

50sqm+ = Contact Us!

This material is fire rate to ISO 3795 / DIN 75200 < 100mm/min

We use 7mm internal diameter eyelets

Tensile strength - Warp:2500

Tensile strength - Weft:2300

Tear strength - Warp:250

Tear strength - Weft:230

Adhesion strength - 20N/cm