This mesh banner material is best suited for windy conditions, as the material is made up a lots of little holes, it allows the wind to pass through and reduces the wind load and pressure on the fixings for the banner.

As with all our banners, there is a range of finishing that can be added to your banner at no extra charge, these are:

Hem and eyelet - This is the most common way of finishing banners, we fold the edges of the banner over and stitch them in place, and then punch eyelets along each each edge 1m apart.

Pole pockets - This is used to slide onto poles, we fold over opposite edges and stitch in place at whatever diameter you require to fit on your pole, the other edges are then just trimmed to size.

Trim to size - This is just what it says, we trim all the edges to the correct size as you specify for your banner.

As there could be hundreds of different ways of finishing a banner, we haven't put them all down here as options, but if you do require something more specific just let us know when placing your order and we will be able to help.

Price Per Square Meter:

0-10sqm = £15/sqm

11-20sqm = £14.25/sqm

21-30sqm = £13.50/sqm

31-50sqm = £12.95/sqm

50sqm+ = Contact Us!

This material is B1:M1 Fire Rated

We use 7mm internal diameter eyelets

Tensile strength - Warp:1550

Tensile strength - Weft:1350

Tear strength - Warp:400

Tear strength - Weft:290